Painting Overview
End-to-end powder coating line for metal panels and frame structures, combining dipping or spray pretreatment, a high-efficiency powder booth, curing oven, and dust collector to deliver durable, uniform results.
How It Works
A painting line runs best when every stage is planned as one connected flow. From cleaning and dry-off to coating, curing, and inspection, each step controls contamination, airflow, and temperature so the finish stays consistent and defects are reduced.
Surface preparation (pretreatment)
Remove oil, dust, and contaminants using staged cleaning and rinsing.
Dry-off
Dry the part to prevent coating defects and improve adhesion.
Coating application
Apply powder coating, wet coating, or electro-deposition (ED) depending on product needs.
Environmental control
Manage airflow, ventilation, temperature, and humidity to reduce dust and defects.
Curing / baking
Cure the coating to achieve target hardness, adhesion, and finish quality.
Handling and transfer
Use manual, semi-auto, or automated transfer using conveyors, robots, manipulators, or pallet systems.
Quality checks
Verify finish condition and consistency before packing or next process.
Typical Problems Solved
Process Highlights
ESG & Energy Efficiency
- Heat recovery options: reuse waste heat where feasible to reduce operating cost.
- Lower emissions and cleaner operations : better ventilation and filtration to reduce VOCs and defects.
- Resource efficiency : minimise paint and chemical waste with stable, efficient transfer.
FAQs
Do you build manual lines too, or only automation?
Can you handle water-based and solvent-based paint systems?
Both. We deliver manual, semi-automated, and fully automated lines based on output and budget.
How do you reduce dust and defects?
Both. We deliver manual, semi-automated, and fully automated lines based on output and budget.
Can you integrate pretreatment and curing into one line?
Both. We deliver manual, semi-automated, and fully automated lines based on output and budget.
Do you support robotic painting?
Both. We deliver manual, semi-automated, and fully automated lines based on output and budget.
Need a Reliable Engineering Partner?
Share your requirements and we will recommend the best-fit solution.